Hardwood Floors

Hardwood Floors Installation, Refinishing and Maintenance | Denver – The Front Range

Everyone Loves Hardwood Floors!

Yes, everyone loves a rich, beautiful hardwood floor. And hardwoods truly can last forever if they are properly maintained.

Other great news is that hardwood floors, when properly maintained, are the easiest of all floor surfaces to keep clean and new looking. At Superior Floor Care we use the finest products available from BonaKemi. Most floors can be completely sanded and finished in 1-2 days with virtually no dust and little inconvenience.

If you’re looking to have new or additional hardwood flooring installed we can do that as well.

98% Dust Containment on our Complete Sand and Refinish Process

At Superior we can take care of even the most worn or damaged hardwood flooring. We use top of the line Dust Containment technology to capture 98% of air born dust before it has a chance to spread through your home. No more messy clean up or moving out of your home to get the floors refinished. We can even move your furniture and appliances for you if need be.

Qualified, Trained Technicians

In the hands of a trained technician these products will completely restore your hardwood floors.

Does your floor need to be refinished?

An easy way to tell is if cleaning no longer restores your floors to an acceptable appearance. Besides the dull appearance, look for scratches, gouges, separation between boards, plank damage, loss of stain or exposed wood.

Did you know?

If floors are neglected, the finish can wear through causing loss of stain color and damage to the actual wood.

Our Superior maintenance system is 98% dust free! You will not be cleaning up dust months later as is the case with most other companies sanding process!

The Superior system is virtually odorless; it’s non toxic and dries in about 2-3 hours. You can walk on the floor in your stockings at that time. Don’t allow shoes on the floor for the first 24-48 hours. After that, your new finish is hardened and ready for normal use. We recommend moving furniture back on the floor in 36-48 hours and rugs back in 10 days as the floor will continue to cure for about 7 days.

The Superior Process

Step 1 – Visual Inspection
We will join you in the inspection to be sure that we have found all damaged areas.

Step 2 – Damage Repair
Replace and repair any damaged areas as needed.

Step 3 – Initial Sanding of Floor
This step removes all of the old finish from your floor exposing the raw wood, removing scratches and re-leveling your floors surface.

Step 4 – Hand Trowel Floor
The reason we hand trowel your floor is to fill any separation between floor planks. This also aides in future sanding passes.

Step 5 – Additional Floor Sanding
Your floor will usually receive at least three sanding passes during our process one to remove the old finish and the others to smooth the floor out, preparing it for the stain/sealer and finish.

Step 6 – Stain Coat
Once your floor has been properly sanded it is then time to apply (depending on the species) either your new stain or a clear sealer. If you have a species of floor that is able to be stained you have the option of several stain colors to choose from.

Step 7 – First Finish Coat
You have your choice of semi-gloss, satin or naturale finish all from BonaKemi. We prefer to use water born finishes for this coat. Water born finishes cure much quicker than oil based and have virtually no odor. This provides for a healthier indoor environment for you and your family.
Note: Upon request oil based finishes are available.

Step 8 – Final Finish Coat
Once the first coat is cured (Usually about 2-3 hours) the final finish coat is applied.
Your wood floor is now fully restored and ready for years of enjoyment!!

Click here for Hardwood Floor Care Tips



Verify by typing the code into the box